Contact Us
TEL:+86-510-85918899
Fax: +86-510-85917799
E-mail: submit@wxlsshzb.com
Address: No.18 Longdan road, Hu Dai Industrial Park, Binhu district, Wuxi, Jiangsu province, China
Home > Knowledge > Content
Water separation device for stainless steel reaction kettle
Oct 05, 2020

In the process of designing the interior of the rusty steel reactor, there will be a water separator, whose main function is also very unique. When used, most of the water and impurities inside the stainless steel reactor can be removed, so as to improve the quality of resin.

 

Stainless steel reaction kettle because of more water separation device, so the energy loss can also be reduced, can reduce its use cost. This water separation device is mainly composed of three parts: switch valve, view mirror and connecting pipe. Drainage must be timely and accurate when used, not only to avoid not timely drainage caused by the water separator did not play the role of water separation, but also to avoid the solvent as water discharge caused by waste and pollution.

 

When the stainless steel reactor in the reaction stage, must open the connected valve, its main purpose is to prevent the kettle when the pressure cannot backflow, in the case of vacuum feeding or discharging, must close the backflow valve and vent valve, so as not to pump the solvent and water in the water separator into the reactor.

 

In general, the stainless steel reaction kettle is the effective foundation for its actual demand to fill, as long as the use of less than 80% can be; If you are already familiar with the hydrothermal reactor reaction, you can fill it up to 90%. When the filling degree in the reactor is small, the space left is larger, and at high temperature, the relative pressure is smaller.

 

If the solubility of the ligand in the stainless steel reactor is small, you can consider a larger filling degree so that the pressure will increase, but not too large filling degree. If the solvent has a high boiling point and a low reaction temperature, the reactor can be filled with a little more, but the general situation will not appear the solvent has a high boiling point and a low reaction temperature.

https://www.wxlsshzb.com

Previous: Reaction kettle quickly obtain high temperature operation method

Next: Stainless steel reaction kettle anti-static