Contact Us
TEL:+86-510-85918899
Fax: +86-510-85917799
E-mail: submit@wxlsshzb.com
Address: No.18 Longdan road, Hu Dai Industrial Park, Binhu district, Wuxi, Jiangsu province, China
Home > Knowledge > Content
The working performance of the blade cutting machine
Nov 20, 2019

There are three feeding methods: feeding, feeding, feeding. According to the characteristics of chemical materials, there are single drum and double drum.

 

The material groove heat preservation has steam heat preservation, heat conduction oil circulation heat preservation, electric heat preservation.

 

The equipment is divided into open type and semi-closed type, fully closed type, vacuum type, nitrogen protection type.

 

Blade material, brass, phosphor bronze, nylon, bakelite, alloy steel saw blade.

 

Discharge system has single, double, etc.

 

Special requirements: regular shape and size of the material, to ensure the thickness and size uniformity of the material.

 

The cooling or (heating) system is split jacket type or spray type, according to the size of the slicer and the characteristics of the material to design, can improve the heat transfer efficiency and increase the drum strength, and improve the relative product output.

 

The cooling water adopts packing seal or rotary joint, which can reliably prevent water leakage, and the new process is applied to reduce the consumption of cooling water.

 

Both ends of the drum have heat insulation layer and side scraper, both ends of the drum do not knot, so there is no friction at both ends of the drum power consumption, to eliminate the problem of starting instability due to the end of the knot

https://www.wxlsshzb.com

Previous: Characteristics of blade cutting and scraping machine

Next: Material status, position and drum strength of scraper