Contact Us
Fax: +86-510-85917799
Address: No.18 Longdan road, Hu Dai Industrial Park, Binhu district, Wuxi, Jiangsu province, China
Home > Knowledge > Content
The performance and characteristics of the scraper
Apr 12, 2020

1. The condensing and crystallization slicer is referred to as the slicer, which is also known as the slicer, scraper and drum slicer. Is the heated fluid raw material, through stainless steel inner cooling roller in the device's internal rotation manger adhesive tape to the front of the adjustable biopsy on the knife device (blade), thereby complete liquid by cooling rollers, blades, blade is converted into a solid piece of material, may also become the crystals of the raw materials of liquid by cooling section. Widely used in chemical, pharmaceutical, new materials and other industries. The raw materials formed by slicing machine can improve the grade of products more than other raw materials of crushing processing. Moreover, the equipment stability is good, the operation is convenient, the slice material thickness, the output can be decided according to the characteristics of the raw material, the barrel speed, the feeding speed. Section specifications for irregular shape, can also be customized according to customer requirements.


2. There are three feeding methods: upper feeding, middle feeding and lower feeding. According to the characteristics of chemical materials, single drum slicer and double drum slicer are divided.


2. The preheating of material tank heat preservation includes steam heat preservation, heat conduction oil circulation heat preservation and electric heat preservation.


3. The equipment is divided into open type, semi-closed type, fully closed type, vacuum type and nitrogen protection type.


4. The blade material is copper, stainless steel, nylon, tetrafluoroethylene, bakelite, alloy steel saw blade.


5. The discharging system includes single bucket discharging, double bucket discharging and screw conveyor discharging.


6. Sheet size and thickness: the material is irregular shape of the nail sheet, can ensure the sheet thickness and size uniformity.


7. The cooling or (heating) system has split jacket or spray type, according to the size of the slicer and the characteristics of the material to design, can improve the heat exchange efficiency and increase the drum strength, and improve the relative product output.


8. The cooling water adopts packing seal or rotary joint, which can reliably prevent water leakage, and the new process is applied to reduce the consumption of cooling water.


9. Both ends of the drum are equipped with thermal insulation layer and side scraper, and both ends of the drum do not knot, so there is no friction power consumption at both ends of the drum, which eliminates the problem of starting instability due to the end face knot.

Previous: Production requirements of scraper

Next: The use of the scraper characteristics