Contact Us
Fax: +86-510-85917799
Address: No.18 Longdan road, Hu Dai Industrial Park, Binhu district, Wuxi, Jiangsu province, China
Home > Knowledge > Content
The design basis of stainless steel reaction kettle jacket
Oct 20, 2020

The heat transfer mode of the stainless steel reaction kettle jacket is basically established, which is mainly divided into the following three structures:


1. There are jacket (the most commonly used jacket structure with large heating area) on the upper and lower seals of part of the cylinder of the reaction kettle.


2. There is a part of jacket on the cylinder of the reaction kettle, which is suitable for occasions with small heating area.


3. There is a jacket on the whole barrel of the reactor. This way is called the all-enveloped jacket, and the heat transfer area is the largest.

Previous: Control method for the corrosion margin inside the reactor

Next: Principle of calcification reaction in the reactor