Contact Us
Fax: +86-510-85917799
Address: No.18 Longdan road, Hu Dai Industrial Park, Binhu district, Wuxi, Jiangsu province, China
Home > Knowledge > Content
Structure of chemical reactor and chemical reaction during operation
Oct 08, 2018

The outer layer of the chemical reactor and the steam pipe are wrapped with asbestos or other non-heat-transferable materials as insulation layers, which not only reduces energy consumption, but also avoids burns to the operator. The gasket between the kettle body and the kettle lid should be padded. Pay attention to the gland seal when installing the stirrer.


The chemical reactor is generally used in the enamel kettle, that is, the inner wall surface of the kettle is coated with acid and alkali enamel, which has the chemical stability of glass and the pressure bearing capacity of the steel container; the lining is mainly composed of silica and other The glaze made of various elements is sprayed on the surface of the metal substrate by multiple spraying and multiple sintering.


The chemical reaction kettle can resist the erosion of various concentrations of organic acids, inorganic acids, organic solvents and weak bases other than hydrofluoric acid and strong alkali; the internal pressure is less than 1O1 kPa; at the bottom of the jacket There is a hole, which is connected to the cold water pipe, and can also drain the excess steam and cooling water.


In the upper part of the chemical reactor jacket, there are 1-2 holes connected to the steam pipe, and the cooling water is discharged, so that the heat can be fully utilized and the heat released by the reaction can be taken away, and the temperature of the reaction liquid is prevented from being too high, which can be effectively controlled. Exothermic reaction.

Previous: Surface plating process of spiral plate heat exchanger

Next: Chemical reaction of the reaction vessel and advantages of use