Contact Us
TEL:+86-510-85918899
Fax: +86-510-85917799
E-mail: 13806188022@163.com
Address: No.18 Longdan road, Hu Dai Industrial Park, Binhu district, Wuxi, Jiangsu province, China
Home > Knowledge > Content
Storage container use process and inspection and maintenance
Nov 08, 2018

During the use of the storage container, the storage tank for storing flammable gas and flammable liquid shall be equipped with necessary fire-fighting equipment. It is strictly forbidden to smoke in the tank, open fire, heat, and bring the source of ignition into the tank area. Inside. For storage tanks that store flammable, explosive, toxic, corrosive and other media, the relevant provisions on the management of dangerous goods shall be strictly implemented.

 

The storage container must be cut off from all relevant electrical equipment before repair and inspection. The equipment must be handed over. After the internal medium of the storage tank is exhausted, the inlet and outlet valves or the pipes and equipment connected to the blind partition should be closed. With a clear partition sign.

 

Storage containers For storage tanks containing flammable, corrosive, toxic, or suffocating media, they must be replaced, neutralized, disinfected, cleaned, etc., and analyzed and tested after treatment. The analysis results should meet the requirements of relevant regulations and standards. . It is strictly forbidden to replace with air with flammable medium.http://www.wxlsshzb.com/


Previous: Simple understanding of five more common heat exchangers

Next: Accurate control of temperature in heaters in heated reactors