Contact Us
TEL:+86-510-85918899
Fax: +86-510-85917799
E-mail: 13806188022@163.com
Address: No.18 Longdan road, Hu Dai Industrial Park, Binhu district, Wuxi, Jiangsu province, China
Home > Knowledge > Content
Reaction vessel reaction requirements and feed method
Oct 25, 2018

The reaction vessel will react within the limits of the explosion during operation. The air or the mixer of the reaction material with oxygen should be placed near the reactor inlet to ensure that the feed gas enters the reactor immediately after mixing, reducing the possibility of occurrence. The space of the explosion. Feedstock gas and oxygen or air can also be fed separately to avoid the formation of explosive mixtures.

The reaction vessel requires a reaction that is carried out under conditions close to the explosion limit, and the mixing ratio of the feed gas and air or oxygen is strictly controlled to some extent. The production equipment must have automatic control instruments, component analyzers and safety interlock alarm devices. For a reaction vessel with a flammable gas or flammable liquid vapor, it must be replaced with an inert gas before feeding. After the reaction is completed, it is also necessary to replace the tender gas or vapor in the container with an inert gas in order to put in the air, and the replacement must be thorough.

The reaction vessel promptly cleans the coking in the equipment pipeline

It is necessary to regularly remove dirt, char, and polymer from the equipment to ensure good heat transfer and prevent it from clogging the equipment and causing tenderness. The cleaning method can be used to flush the surface of the water and the pipe with nitrogen or water vapor. When using it, do not use iron tools or metal strips. The cleaned dirt must be sent to a safe place for disposal.http://www.wxlsshzb.com/


Previous: The use of industrial mixing tanks and the selection of heating and cooling methods

Next: Heat exchanger type and advantage