Contact Us
Fax: +86-510-85917799
Address: No.18 Longdan road, Hu Dai Industrial Park, Binhu district, Wuxi, Jiangsu province, China
Home > Knowledge > Content
Correct use instructions for magnetic stirrer
Sep 26, 2018

The magnetic stirring tank is a kind of equipment specially used for material mixing. Its use must be carried out in strict accordance with the specifications, so that it is possible to achieve good mixing effect. Before the magnetic stirring kettle is used, the kettle should be filled with clean water and then sterilized, and then passed the conductivity test to make the ingredients.


All kinds of materials enter the magnetic stirring kettle from the material port fixed on the lid of the kettle, and the input materials are not suitable for loading too much materials, so as to avoid splashing when the materials are stirred, resulting in unsanitary or loss. Proportionally loaded into the tank, the mixer motor can be turned on to stir while adding liquid. When the liquid level is specified, the inlet valve is closed. After it is full, the motor is started. After 3 to 5 minutes, the mixture is evenly distributed. After that, the bottom valve is opened to discharge.


If the working object of the magnetic stirring tank is a solid material, it is necessary to feed through the inlet hole. After the stirring of the magnetic stirring kettle is finished, the residual material in the kettle should be drained, and should be rinsed off with water as soon as possible for the next use

Previous: Analysis of Heat Exchanger Process Design for Heat Exchanger

Next: The structural composition of industrial mixing tanks and their respective functions