Product Categories

TEL:+86-510-85918899
Fax: +86-510-85917799
E-mail: submit@wxlsshzb.com
Address: No.18 Longdan road, Hu Dai Industrial Park, Binhu district, Wuxi, Jiangsu province, China

Home > Product > Heat Exchanger > Plate Heat Exchangers

plate heat exchanger calculation

Spiral Plate Type Heat Exchanger Introduction Plate heat exchanger works is cold, heat medium through the heat transfer plate heat transfer, heat exchange, so that the heat medium temperature, cold medium temperature, in order to achieve the media cooling, heating, condensation and evaporation....

Send Inquiry

Spiral Plate Type Heat Exchanger Introduction

Plate heat exchanger works is cold, heat medium through the heat transfer plate heat transfer, heat exchange, so that the heat medium temperature, cold medium temperature, in order to achieve the media cooling, heating, condensation and evaporation.

Plate heat exchanger by: heat exchanger plate, seal pad, front plate, rear plate, upper and lower guide beam, clamping bolts and other major components. The four corners of the heat transfer plate are open with corners, and the upper and lower corners are pressed to seal the groove with the sealing pad, and the middle part is pressed into the chevron. Seal pads full range, and the use of high-quality raw materials production, after several disassembly can still continue to use.

Spiral Plate Heat Exchanger

Fob price: us$200/set

Application: Heater, Cooler, Condenser

Specification: heat exchange area

Material: Stainless Steel or Carbon Steel

Transport Package: Wooden Case

Spiral Plate Type Heat Exchanger Description

Removable Spiral Plate Heat Exchanger

1.Material: stainless steel304/316, carbon steel, titanium.

2.Structure and Performance:

a. The end of type I un-removable spiral plate heat exchanger's spiral channel is sealed by welding, so it has a high confidentiality seal.

b. Type removable spiral plate heat exchanger is almost the same as type I, except that one of the channel can be open to clean.

Technical Parameters

Main technical parameters of acid-resisdant stainless steel spiral heat exchanger

Norminal pressure	Norminal heat transfer area	Norminal diameter	Channle spacing	Thickness of plate	Width of plate	Calculation of heat transfer area	Velocity 1m/s capital	Norminal diameter	Length of spiral channel	Section area of spiral channel	Diameter of spiral center
PN	FN	DN	b	δ	H	F	V	dn	Lt	f	d
Mpa	m2	mm	mm	mm	m	m2	m3/h	mm	m	m2	mm
≤1.6	1	300	6	2, 3	0.2	1.07	3.96	40	2.95	0.00110	160
	2	400	6		0.2	2.08	3.96	40	5.71	0.00110	160
	4	400	6		0.4	4.28	8.28	50	5.71	0.00230	160
	4	500	10		0.4	4.95	13.40	65	6.78	0.00372	200
	6	400	6		0.6	5.95	12.60	65	5.22	0.00350	200
	6	500	10		0.5	6.28	17.00	80	6.76	0.00472	200
	8	500	6		0.4	7.19	8.28	50	9.50	0.00230	200
		500	10		0.6	7.58	20.60	80	6.76	0.00572	200
		600	10		0.5	8.69	17.00	80	9.37	0.00472	200
	10	600	6		0.4	10.50	8.28	50	13.85	0.00230	200
		600	10		0.6	8.67	20.60	80	7.71	0.00572	300
		700	14		0.6	9.33	28.27	100	8.47	0.00785	300
		700	14		0.5	7.70	23.23	100	8.47	0.00645	300
	15	700	6		0.5	18.07	10.44	65	18.92	0.00290	200
		800	10		0.5	16.97	17.00	80	18.14	0.00472	200
		700	14		0.8	14.27	38.35	100	9.55	0.01065	300
	20	700	6		0.6	21.78	12.60	65	18.92	0.00350	200
		800	10		0.6	18.57	20.60	80	16.41	0.00572	300
		800	14		0.8	19.70	38.35	100	13.14	0.01065	300
	25	800	6		0.5	24.83	10.44	65	25.92	0.00290	200
		800	10		0.8	24.97	27.80	100	16.41	0.00772	300
		900	10		0.6	24.67	20.60	80	21.74	0.00572	300
		900	14		0.8	25.86	38.35	100	17.21	0.01065	300
	30	700	6		0.8	29.18	16.92	80	18.92	0.00470	200
		800	10		1.0	31.38	35.00	100	16.41	0.00972	300
		1000	14		0.8	32.77	38.35	100	21.76	0.01065	300
	40	1000	10		0.8	42.39	27.80	100	27.72	0.00772	300
	40	1000	14		1.0	41.25	48.43	125	21.76	0.01345	300
	50	1000	10		1.0	53.26	35.00	100	27.72	0.00972	300
	50	1000	14		1.2	49.74	58.51	150	21.76	0.01625	300
	60	1200	10		0.8	63.89	27.80	100	41.65	0.00772	300
	60	1200	14		1.0	57.72	48.43	125	30.41	0.01345	300
	80	1200	10		1.0	80.27	35.00	100	41.65	0.00972	300
	80	1400	14		1.0	81.03	48.43	125	42.55	0.01345	300
	100	1400	10		1.0	108.02	35.00	100	55.98	0.00972	300
		1400	14		1.2	97.70	58.51	150	42.55	0.01625	300
		1600	14		1.0	108.07	48.43	125	56.62	0.01345	300

FAQ

1.Q: Do you accept a special order?

A: Yes, we do.

We can manufacture all kinds of chemical equipments according to your technical drawings.(Before you give them to us, will sign the contract and confidentiality agreement with you. You don't need to worry about that.)

Or we can make a design for you according to your requirements. What we supply is not only product, but also solution and design.

2.Q: Can your engineer come to our place for installation guide?

A: Yes, we can. We will provide a video and document for installation. If you still have problem, we will send our engineer oversea for installation guide.