Contact Us
TEL:+86-510-85918899
Fax: +86-510-85917799
E-mail: 13806188022@163.com
Address: No.18 Longdan road, Hu Dai Industrial Park, Binhu district, Wuxi, Jiangsu province, China
Ordinary Reactors For Polymer Adhesive Maker

Ordinary Reactors For Polymer Adhesive Maker

Ordinary Reactors for Polymer adhesive maker Introduction The machine consists of a kettle body, a stirring shaft, a frame, a dynamic seal, a fractionation column, a condenser, a receiving tank, an electric cabinet, a transmission system, a kettle body, a hydraulic lifting system, and an...

Ordinary Reactors for Polymer adhesive maker Introduction

The machine consists of a kettle body, a stirring shaft, a frame, a dynamic seal, a fractionation column, a condenser, a receiving tank, an electric cabinet, a transmission system, a kettle body, a hydraulic lifting system, and an electric control system.


Structural characteristics:

1. Transmission mechanism: motor, reducer, frame, coupling, bearing, connecting plate and so on.

2, the reaction vessel (cavity): according to the size of the capacity and material reaction requirements design pressure to determine the thickness of the sheet; the material is generally stainless steel (304 stainless steel, 321 stainless steel, 316L stainless steel), carbon steel (A3);

3. Heat transfer device: jacket, inner coil, outer coil, etc.; heating by organic heat carrier circulation (heat transfer oil) or steam, hot water, etc.; cooling water, chilled water, cold heat transfer oil or natural wind, etc. Mode cooling

4. Stirring device: stirring of paddle, anchor paddle stirring, double propeller stirring, turbine stirring, dispersing disc, butterfly paddle, etc.;

5. Stirring speed: The stirring speed is selected according to the material mixing requirements. Generally speaking, several liquid materials need to be mixed and reacted generally at 50 rpm/-85 rpm. If it is required to disperse the powder into the liquid, generally choose 500 rpm / 1500 rpm. If it is required to emulsifie oil in water or emulsified with two incompatible liquids, it is generally selected from 2500 rpm to -3500 rpm.

6. Sealing device: mechanical seal, packing seal, etc.;

7. The complete set of equipment for the reaction kettle generally has a distillation column, a heat exchanger, a water separator, and the like.


Production equipment

1.jpg


Features:

1. Stainless steel has excellent mechanical properties, can withstand high working pressure, and can withstand the impact of bulk solid materials when feeding.

2, good heat resistance, wide operating temperature range (-196-600 ° C), no oxygen peeling at higher temperatures, can be used for direct open flame heating.

3. It has high wear and corrosion resistance.

4. The heat transfer effect is good, and the heating and cooling speed is fast.

5, with excellent processing performance, can be made into reactors of various shapes and structures according to different process requirements, and can also be polished and polished.


Hot Tags: ordinary reactors for polymer adhesive maker, China, manufacturers, suppliers, factory, price, custom
Inquiry