Contact Us
TEL:+86-510-85918899
Fax: +86-510-85917799
E-mail: 13806188022@163.com
Address: No.18 Longdan road, Hu Dai Industrial Park, Binhu district, Wuxi, Jiangsu province, China
Electric Heating Resin Reaction Kettle

Electric Heating Resin Reaction Kettle

Electric heating resin reaction kettle Introduction The electric heating resin reaction kettle is composed of a pot body, a pot cover, a stirrer, a jacket, a support and a transmission device, a shaft sealing device, etc. The material and the opening can be made according to the user's...

Electric heating resin reaction kettle Introduction

The electric heating resin reaction kettle is composed of a pot body, a pot cover, a stirrer, a jacket, a support and a transmission device, a shaft sealing device, etc. The material and the opening can be made according to the user's process requirements. The heating forms include electric heating, oil heating, gas heating, water heating (or cooling), open flame heating, and the like. The jacket form is divided into a jacket type and an outer half tube type, and the jacket oil heating type is provided with a flow guiding device. The stirring form generally has a paddle type, an anchor type, a frame type, a screw type, a scraped wall type and the like. The high-speed type has a decentralized impeller type, a turbine type, a high-shear type, and a propeller type, which are available for customers to select according to the process. The transmission forms include ordinary motor, explosion-proof motor, electromagnetic speed regulating motor, frequency converter, etc. The heat exchanger has cycloidal pinwheel type, worm wheel type and planetary stepless speed change type. The shaft seal is a common water-cooled packing seal, a combined PTFE packing seal, and a mechanical seal. The discharge form includes a ball valve and a lower spread valve.


Feature:

The electric heating resin reactor should be installed on a sturdy and leveling workbench. The height of the workbench is determined according to the use conditions. There must be some space around the equipment and the workbench for installation and post-maintenance. The installation of the electrically heated resin reactor requires that the drive shaft is perpendicular to the ground level, and the inclination of the non-perpendicularity shall not be greater than 1/1000 of the total height of the equipment.


Customers:

1.jpg


The electric heating resin reaction kettle is injected into the mechanical oil before the start-up of the speed reducer. The motor protection cover is opened by hand to turn the fan blades to check whether there is any jamming phenomenon. If the stirring paddle has a scraping wall phenomenon, the dirt in the kettle can be cleaned before starting. The empty car runs for 30 minutes without major noise and vibration, and can be officially put into production.


Hot Tags: electric heating resin reaction kettle, China, manufacturers, suppliers, factory, price, custom
Inquiry