Contact Us
TEL:+86-510-85918899
Fax: +86-510-85917799
E-mail: 13806188022@163.com
Address: No.18 Longdan road, Hu Dai Industrial Park, Binhu district, Wuxi, Jiangsu province, China
Home > News > Content
Application Of Plate Heat Exchanger In Refrigeration Industry
Dec 07, 2017

Heat exchanger is a kind of efficient and compact heat transfer equipment, widely used in refrigeration system, is an indispensable equipment in the refrigeration system, can be used as a condenser, evaporator, heat exchanger and the intermediate cooler heat exchanger, with the conventional shell and tube heat exchanger, the volume is only the tube shell type 1/3~1/6, only the weight of shell type 1/2~1/5, the refrigerant charge required only shell type 1/7, heat transfer efficiency ratio of shell and tube heat exchanger is 2 ~ 5 times, has the advantages of energy saving, compact structure, convenient disassembly, widely used in refrigeration industry such as the evaporator, condenser, heat exchanger and water chiller air-cooled heat pump chiller in (superheated cooler), liquid cooling device, and screw compressor oil cooler heat transfer application.

1. Basic requirements for plate heat exchangers for refrigerating equipment

(1) heat exchanger for the refrigeration device, because the refrigerant side pressure is high (up to about 25bar), strong penetration, should be specifically for high pressure brazed plate heat exchanger of refrigeration industry production. (2) the heat transfer coefficient is an important index to measure the heat exchange efficiency of the heat exchanger. With the improvement of the unit volume energy requirements of the refrigeration unit, the unit volume heat transfer area of the plate heat exchanger used in the refrigeration equipment is also increased accordingly. The water-cooled and ethylene glycol cooling units adopt the compact stainless steel brazing plate heat exchanger in Colleges and universities, and the heat exchange efficiency is much larger than that of shell and tube heat exchangers. The structural rate is only 1/10 of shell and tube condenser.

2. The plate heat exchanger used as the evaporator is used in the air cooling heat pump unit, and the plate heat exchanger is used as evaporator in the refrigeration cycle.

3, plate heat exchanger used as condenser is used as evaporator in plate heat exchanger of heat pump unit, which is used as condenser in heat pump cycle.

4, heat recovery unit for heat exchanger heat recovery unit is using condensation heat for heating the tap water into the hot water process with hot water, so as to take away the heat generated by the condensation refrigeration system, which will directly meet the water amount of tap water into the heat recovery heat exchanger (also known as superheated cooler), partial condensation latent heat utilization of the exhaust compressor the sensible heat to heat the heat from condenser, the remaining exhaust gas discharged into the atmosphere. The plate heat exchanger used as heat recovery is installed between the condenser and the compressor.


Next: No Information