Contact Us
TEL:+86-510-85918899
Fax: +86-510-85917799
E-mail: 13806188022@163.com
Address: No.18 Longdan road, Hu Dai Industrial Park, Binhu district, Wuxi, Jiangsu province, China
Home > Knowledge > Content
What are the differences between steam-water and water-water heat exchangers?
Jun 22, 2018

As we all know, plate heat exchanger is a high heat transfer heat exchange equipment, the scope of application is also more extensive. At present, the plate heat exchanger is commonly used in the four components of steam-water, oil, water, and oil, among which there is a clear difference between the steam-water and the water plate heat exchanger.

 

The difference between a steam-water plate heat exchanger and a water-water plate heat exchanger is that the differences are first manifested at the plate angle. In general, when the manufacturer selects the model, it selects the corresponding plate angle according to different media. Water and water conditions, generally use a large angle. Steam conditions, generally use a small angle.

 

Followed by plate heat exchanger plate slot depth, a part of the depth of the tank is to see the media itself, there is also a part of the calculation results that is the logarithmic temperature difference. In general, the deeper groove depth is selected for steam conditions. There is also the difference in plate design.

 

In the selection and design process of the plate heat exchanger, in addition to the need to consider the flow and temperature, the design also needs to consider the flow rate of the medium between the plates. Generally speaking, if the water is designed, the flow rate between the plates of the water should be controlled between 0.3m/s and 0.8m/s. If it is not met, the pressure drop can be reduced, the surplus can be increased, or the replacement model can be used. Adjustment. http://www.wxlsshzb.com/


Previous: What are the types and uses of chemical reactors?

Next: Difference of material, performance and use of electric heating reactor