Contact Us
TEL:+86-510-85918899
Fax: +86-510-85917799
E-mail: 13806188022@163.com
Address: No.18 Longdan road, Hu Dai Industrial Park, Binhu district, Wuxi, Jiangsu province, China
Home > Knowledge > Content
Electromagnetic heating reactor heating method and application of advantages
Mar 23, 2018

Electromagnetic heating reactors often appear in petrochemicals, rubber, pesticides, dyes, pharmaceuticals and other fields, mainly for the sulfonation, nitration, hydrogenation, hydrocarbonation, polymerization, condensation and other technical processes, as well as organic dyes and intermediates. Many other technical processes.

 

The material, stirring equipment, heating method, shaft seal structure, volume size, temperature, pressure, etc. used in the reactor are various, but the structure of the reactor is the same, so the electromagnetic heating reactor and other types of reactors are the same.

 

This reactor often appears in petrochemicals, rubber, pesticides, dyes, pharmaceuticals and other fields, mainly used for sulfonation, nitration, hydrogenation, alkylation, polymerization, condensation and other technical processes, as well as organic dyes and intermediates. Many other technical processes.

 

Usually the chemical reaction needs to be carried out under certain temperature conditions and under pressure, so the electromagnetic heating reactor is under both pressure and temperature, and the reason why electromagnetic heating is chosen to obtain high temperature is because water heating is only When the temperature is not high, it can be used. When the steam heating temperature is below 100°C, it can be heated with steam below one atmosphere.

 

Moreover, these heating methods all require the addition of a jacket on the kettle body of the reactor, which will cause the jacket and the shell of the kettle to undergo temperature changes and trigger a temperature differential pressure. The choice of electric heating is different. The electromagnetic heating reactor is not only simple in structure, but also easy to control the temperature. It does not require pumps, stoves, chimneys and other equipment. It is also very simple to start. The danger is not high and the cost is low.http://www.wxlsshzb.com/


Previous: Industrial reactor classification and design of its sealing device

Next: Stainless steel tank surface treatment technology and technology implementation method